Arpeggio Direction

Started by NarrillNezzurh, January 25, 2012, 02:01:19

Previous topic - Next topic

NarrillNezzurh

Is there a way that I can, using 0xx/Jxx, get the arpeggio to start at the highest note rather than the lowest note? I'd like to use arpeggios that go up a 4 note chord, then down the chord.

Saga Musix

Arpeggio direction is fixed. If you want custom arpeggio sequences, you'd have to increase the pattern playback speed or use note delays on the same row.
» No support, bug reports, feature requests via private messages - they will not be answered. Use the forums and the issue tracker so that everyone can benefit from your post.

LPChip

Indeed, as Jojo suggested, the arpeggio is limited.

One small tip for arpeggio's: you can exchange the last 2 digits. Example: C-4 J37 produces the arp in the following way: C-4, D#4, G-4, while C-4 J73 produces the arp in the following way: C-4, G-4, D#4

Although it doesn't exactly sound like a nice going up and down arp, it does get close to it.

Note that arpeggios only work with samples, not with VSTi's. If you're planning to use VSTi's, then its good to know that there are VSTi's out there (including free ones) that have a build-in arpeggio that can do what you want.

But for now, I would suggest setting the row speed to 3, tempo to 125 and pattern row-hilighting to: 3 rows per beat, 12 rows per measure. This'll give you great settings for a C64 kind of arpeggio. I used it in one of my songs to get a great C64 arp that I couldn't get otherwise (with a specific VSTi)

Here's a sample pattern for you to hear the result:


ModPlug Tracker MPT
|E-205......
|...........
|...........
|...........
|...........
|...........
|E-503v64...
|G-503v59...
|B-503v55...
|E-503v50...
|G-503v46...
|B-503v41...
|E-503v37...
|G-503v32...
|B-503v27...
|E-503v23...
|G-503v18...
|B-503v14...
|E-503v09...
|G-503v05...
|B-503v00...
|D-205......
|...........
|...........
|E-205......
|...........
|...........
|...........
|...........
|...........
|E-503v64...
|G-503v59...
|B-503v55...
|E-503v50...
|G-503v46...
|B-503v41...
|E-503v37...
|G-503v32...
|B-503v27...
|E-503v23...
|G-503v18...
|B-503v14...
|E-503v09...
|G-503v05...
|B-503v00...
|B-205......
|...........
|...........


Select the code, and copy paste it into your pattern using the above suggested settings.

Instrument 5 = bass
Instrument 3 = lead (arp)
"Heh, maybe I should've joined the compo only because it would've meant I wouldn't have had to worry about a damn EQ or compressor for a change. " - Atlantis
"yes.. I think in this case it was wishful thinking: MPT is makng my life hard so it must be wrong" - Rewbs

Relabsoluness

#3
If you're using MPTM-format and feel adventurous, you can try creating a custom tuning whose pitch decreases with incresed note, which means that using Jxx with such instrument will behave as desired.