I have an spanish keyboard and I'm learning tracking right now (nice tutorial at the wiki)!
However there are some weird things that I don't know if it's due to my layout or if trackers work this way
In example, I can't get any B or B# into the patterns. In example, Q is C-4, T is E-4, P is A-4, the next of the P is A-5 and the next one is == which I don't even know what it is :)
From left to right again, L is G#5, next is ~~ (stop) and next A#5 (A5 is on top of A#5), and same for the bottom row. I can't even find any B and B#
Is the english layout the same?
Well, "B#" is just "C", just like "E#" is just "F". The easiest way to fix this up is to go into the setup dialog, open up the keyboard tab, select "Pattern Editor - Note Col", and change the keys assigned there.
Most people have one of two types of configuration:
1. Linear arrangement (which I use, because you get more notes.)
(http://test.pbc.wa.edu.au/temp/Layout01.png)
2. "Piano" arrangement (which I don't, so this might be inaccurate :))
(http://test.pbc.wa.edu.au/temp/Layout02.png)
This sounds as though it might be what you have set up by default.
I'm not sure how a Spanish keyboard looks, though... The basic idea should work on just about any keyboard, though.
"==" is a note-off command. It stops the note currently playing (using any volume envelopes you might have set up).
"^^" is a note-cut command. It stop the note currently playing straight away, without any fades or whatever.
Nice material, these pics. Thanks Barry. :)
That's ok. ;)
Quote from: "bvanoudtshoorn"Well, "B#" is just "C", just like "E#" is just "F". The easiest way to fix this up is to go into the setup dialog, open up the keyboard tab, select "Pattern Editor - Note Col", and change the keys assigned there.
Thanks!
I don't know exactly what I modified in that menu option but it seems to work as your drawings (nice, btw!)
I'll cross the fingers and expect to be working with this layout for some years :)
Thanks again! :)
Kak
The default layout is the 1st picture, but it can be configured as the second picture from the setup menu. Also there are alot of presets around which usually use the 2nd layout.
One more question about ^^, is it supported on MOD files?
I mean, if I use it, modplug turns it into B-8 next time I load it, making some high pitch noises instead of note cut :(
Also I've found that if I put v32 in the volume column, when saving to mod changes it to C10... shouldn't it be C20 ?
The MOD format is the oldest format supported by OpenMPT. The formats has been improved alot during the time. First with S3M, then XM then IT. MOD is a very basic format with alot of limitations. One of the things is the range notes can be played in. B-8 is outside of that range.
A small tip would be to learn tracking in the IT format and once you understand it and still want to work with MOD, switch later. That way you'll be familiar with the interface so there are less things that can go wrong.
MOD had only octaves from C1 to B3 which is C4 to B6 in OpenMPT. You can't use ^^^ in MOD and XM files, you have to use C00 in these formats.
About your v32 issuse... i haven't tested this for ages, but it always worked correctly. probably your sample has the "global volume" setting set to 32 (half volume). MOD files don't have a global volume setting per sample and so this must be converted...